Asus RS161-E4/PA2 - Manual (Page 42)

Chapter 2: Hardware setup 2-26
To reinstall the motherboard:
1. Firmly hold the motherboard by
the sides and insert it into the
chassis.
2. Carefully adjust the motherboard
until the rear panel ports fit in
place.
4. Reconnect all the required cables to the motherboard. See section “2.7
Cable connections” for illustration.
5. Reinstall all the devices that you have previously removed.
3. Use a Phillips (cross) screwdriver to secure the motherboard with 10
screws in the holes as shown in the illustration.
R
KFN4-DRE