4 power supply module – Asus RS161-E4/PA2 User Manual
Page 38
Advertising
Chapter 2: Hardware setup
2-22
2.9.4 Power supply module
To uninstall the power supply module:
1. Disconnect all the power cables
connected to the motherboard and
other system devices.
2. Use a Phillips (cross) screwdriver
to remove the screws that secure
the front end of the power
supply.
4. Slide the power supply forward for
about half an inch, then carefully
lift it out from the chassis.
3. From the rear panel, remove two
screws that secure the power
supply from the chassis.
Advertising