Asus SL1200 - Manual (Page 113)

96
Chapter 9 - Configuring Firewall/NAT Settings
ASUS SL1200
9.7.2.4 Modify a NAT Pool
To modify a NAT Pool
1. Open the NAT Pool Configuration page. See section 9.7.2.2 Access
NAT Pool Configuration Page.
2. Click on the icon of the NAT pool to be modified in the NAT Pool
List table or select the NAT pool from the NAT Pool drop-down list.
3. Make desired changes to any or all of the following fields: Pool name,
Pool type and IP address.
4. Click on < Modify> to save the new settings. The new settings for this
pool will then be displayed in the NAT Pool List table.
9.7.2.5 Delete a NAT Pool
To delete a NAT Pool, click on the icon of the NAT pool to be deleted
or follow the instruction below:
1. Open the NAT Pool Configuration page. See section 9.7.2.2 Access
NAT Pool Configuration Page.
2. Click on the icon of the NAT pool to be deleted in the NAT Pool List
table or select the NAT pool from the NAT Pool drop-down list.
3. Click on < Delete> to delete this NAT pool.
9.7.2.6 NAT Pool Example
Figure 9.21 shows the network diagram for this NAT pool example.
Figure 9.21. Network Diagram for NAT Pool Example