Asus SL1200 - Manual (Page 67)

50
Chapter 7 - Configuring Routes
ASUS SL1200
Field Description
Authentication Click on Enable or Disable radio button to enable/disable
authentication for exchanging the routing information. All
the routers exchanging routing information must use the
same authentication key. The default setting is Disable.
RIP Authentication Mode Select RIP authentication mode from the drop down list. Two
modes are available - Clear Text, and MD5. The default
setting is Clear Text.
Authentication Key Enter the authentication key for shared by all the routers
exchanging routing information. The default authentication
key is admin.
7.2.2 Configuring RIP
To configure RIP
1. Click the Routing menu to open the routing configuration page.
2. In the RIP Configuration page, click the Enable or Disable radio button
depending on whether you want to enable or disable RIP service. Skip
this step, if you have already done so.
Figure 7.1. RIP Configuration
3. Select an interface from the drop-down list via which the routing
information is to be exchanged.
4. To enable or disable RIP for the specified interface, click the Enable or
Disable radio button.