Asus SL1200 - Manual (Page 163)

146
Chapter 13 - IP Addresses, Network Masks, and Subnets
ASUS SL1200
Table 13.1. IP Address structure
Class Field1 Field2 Field3 Field4
Class A Network ID Host ID
Class B Network ID Host ID
Class C Network ID Host ID
Here are some examples of valid IP addresses:
Class A: 10.30.6.125 (network = 10, host = 30.6.125)
Class B: 129.88.16.49 (network = 129.88, host = 16.49)
Class C: 192.60.201.11 (network = 192.60.201, host = 11)
13.2 Network classes
The three commonly used network classes are A, B, and C. (There is also
a class D but it has a special use beyond the scope of this discussion.)
These classes have different uses and characteristics.
Class A networks are the Internet’s largest networks, each with room for
over 16 million hosts. Up to 126 of these huge networks can exist, for a
total of over 2 billion hosts. Because of their huge size, these networks
are used for WANs and by organizations at the infrastructure level of the
Internet, such as your ISP. Class B networks are smaller but still quite
large, each able to hold over 65,000 hosts. There can be up to 16,384
class B networks in existence. A class B network might be appropriate for
a large organization such as a business or government agency.
Class C networks are the smallest, only able to hold 254 hosts at most, but
the total possible number of class C networks exceeds 2 million (2,097,152
to be exact). LANs connected to the Internet are usually class C networks.
Some important notes regarding IP addresses:
• The class can be determined easily from field1:
field1 = 1-126: Class A
field1 = 128-191: Class B
field1 = 192-223: Class C
(field1 values not shown are reserved for special uses)
• A host ID can have any value except all fields set to 0 or all fields set
to 255, as those values are reserved for special uses.