Asus SL1200 - Manual (Page 93)

76
Chapter 9 - Configuring Firewall/NAT Settings
ASUS SL1200
Figure 9.10. Outbound ACL Configuration Example
9.4.4 Modify Outbound ACL Rules
To modify an outbound ACL rule
1. Open the Outbound ACL Rule Configuration Page. See section 9.4.2
Access Outbound ACL Rule Configuration Page.
2. Click on the icon of the rule to be modified in the outbound ACL
table or select the rule number from the “ID” drop-down list.
3. Make desired changes to any or all of the following fields: action,
source/destination IP, source/destination port, protocol, NAT,
time ranges, application filtering, log, and VPN. See Table 9.2 for
explanation of these fields.
4. Click on the < Modify> button to modify this ACL rule. The new settings
for this ACL rule will then be displayed in the outbound access control
list table at the bottom half of the Outbound ACL Configuration page.
9.4.5 Delete Outbound ACL Rules
To delete an outbound ACL rule
1. Open the Outbound ACL Rule Configuration Page. See section 9.4.2
Access Outbound ACL Rule Configuration Page.