Asus SL1200 - Manual (Page 96)

79
Chapter 9 - Configuring Firewall/NAT Settings
ASUS SL1200
9.5.4 Modify URL Filter Rules
To modify an URL Filter rule, you must first delete the existing URL filter
rule (see Section 9.5.5) and then add a new one (see Section 9.5.3 Add an
URL Filter Rule).
9.5.5 Delete URL Filter Rules
To delete an URL Filter rule
1. Open the URL Configuration page. See section 9.5.2 Access URL
Filter Configuration Page.
2. Click on the icon of the rule to be deleted in the URL Filter
Configuration Summary table or select the rule number from the “ID”
drop-down list.
3. Click on < Delete> to delete this rule.
9.5.6 View Configured URL Filter Rules
To see existing URL filter rules, just open the URL Filter Configuration
page as described in section 9.5.2 Access URL Filter Configuration Page.
9.5.7 URL Filter Rule Example
Figure 9.12 shows an URL filter rule example. It demonstrates:
• How to add the keyword “abcnews”. Any URL containing this keyword
will be blocked.
• Set the proxy web server port number to 80 (you may use a different
port number for your proxy server). This means that this URL filter
rule will be applied over the proxy server port 80 in case a proxy
web server is used. If you don’t use a proxy server for your browser,
this setting will be ignored. You must disable and then enable the
firewall for this change to take effect. Refer to 11.1 Configure System
Services on details of enabling and disabling firewall services.