Asus SL1200 - Manual (Page 152)

135
Chapter 11 - System Management
ASUS SL1200
5. Click < Apply> to save the configuration. You can verify your settings
in the existing SNMP configuration table displayed at the bottom of the
configuration page.
Figure 11.5. SNMP Configuration
Figure 11.6. Existing SNMP Configuration
11.6 System Configuration Management
11.6.1 Reset System Configuration
At times, you may want to revert to factory default settings to eliminate
problems resulted from incorrect system configuration.
To reset system configuration
1. Log into Configuration Manager as administrator. Click System
Management -> Configuration -> Default Settings. The Default
Settings Configuration page displays, as shown in Figure 11.7.
2. Click < Apply> to set the system configuration back to factory default.
The Internet Security Router will reboot to make the factory default
configuration in effect.