Asus SL1200 - Manual (Page 86)

69
Chapter 9 - Configuring Firewall/NAT Settings
ASUS SL1200
9.3.2 Access Inbound ACL Rule Configuration Page –
(Firewall -> Inbound ACL)
Log into Configuration Manager as administrator. Click Firewall ->
Inbound ACL.
The Firewall Inbound ACL Configuration page displays as shown in Figure
9.7.
When you open the Inbound ACL Configuration page, a list of existing ACL
rules is also displayed at the bottom half of the configuration page such as
those shown in Figure 9.8.
Figure 9.8. Inbound ACL Configuration Example
9.3.3 Add Inbound ACL Rules
To add an inbound ACL rule
1. Open the Outbound ACL Rule Configuration Page. See section 9.3.2
Access Inbound ACL Rule Configuration Page.
2. Select Add New from the ID drop-down list.
3. Set desired action (Allow or Deny) from the Action drop-down list.
4. Make changes to any or all of the following fields: source/destination
IP, source/destination port, protocol, port mapping, time ranges,
application filtering, log, and VPN. See Table 9.1 for explanation of
these fields.