Asus SL1200 - Manual (Page 69)

52
Chapter 7 - Configuring Routes
ASUS SL1200
7.3.2 Adding a Static Route
To add a static route to the routing table
1. To open the routing configuration page, click the Routing menu.
2. Enter static routes information such as destination IP address,
destination netmask and gateway IP address in the corresponding
fields.
For a description of these fields, refer to Table 7.2. Static Route
Configuration Parameters.
To create a route that defines the default gateway for your LAN, enter
0.0.0.0 in both the Destination IP Address and Destination Netmask
fields.
Figure 7.2. Static Route Configuration
3. Click < Add> to add a new route.
7.3.3 Deleting a Static Route
To delete a static route from the routing table
1. In the Static Routes configuration page as shown in Figure 7.2, select
the route from the service drop-down list or click on the icon of the
route to be deleted in the Routing Table.
2. Click < Delete> to delete the selected route.
Do not remove the route for default gateway unless you
know what you are doing. Removing the default route will
render the Internet unreachable.