Asus SL1200 - Manual (Page 13)

to Four Globally Valid IP Addresses ........................... 61
Figure 9.2 Dynamic NAT - Four Private IP Addresses
Mapped to Three Valid IP Addresses ........................ 62
Figure 9.3 Dynamic NAT - PC-A can get a NAT Association
after PC-B is disconnected ......................................... 62
Figure 9.4 Map Any Internal PCs to a
Single Global IP Address ............................................ 63
Figure 9.5 Reverse Static NAT - Map a Global IP Address
to An Internal PC ........................................................ 63
Figure 9.6 Reverse NAPT - Relayed Incoming Packets to the
Internal Host Base on the Protocol, Port
Number or IP Address ................................................ 63
Figure 9.7 Inbound ACL Configuration Page ............................... 65
Figure 9.8 Inbound ACL Configuration Example ......................... 69
Figure 9.9 Outbound ACL Configuration Page ............................ 71
Figure 9.10 Outbound ACL Configuration Example .................... 76
Figure 9.11 URL Filter Configuration Page .................................. 78
Figure 9.12 URL Filter Example .................................................. 80
Figure 9.13 Self Access Rule Configuration Page ....................... 81
Figure 9.14 Service List Configuration Page ............................... 84
Figure 9.15 DoS Configuration Page ........................................... 89
Figure 9.16 IP Pool Configuration Page ...................................... 91
Figure 9.17 Network Diagram
for IP Pool Configuration .......................................... 92
Figure 9.18 IP Pool Example - Add Two IP Pools -
MISgroup1 and MISgroup2 ...................................... 93
Figure 9.19 IP Pool Example - Deny QUAKE-II
Connection for MISgroup1 ........................................ 93
Figure 9.20 NAT Pool Configuration Page .................................. 95