Asus SL1200 - Manual (Page 153)

136
Chapter 11 - System Management
ASUS SL1200
Figure 11.7. Default Setting Configuration Page
Sometimes, you may find that you have no way to access the Internet
Security Router, such as when you forget your password. The only way out
in this scenario is to reset the system configuration to the factory default.
To reset the router
1. Power down the Internet Security Router and wait for at least five
seconds.
2. Power on the Internet Security Router and wait for at least five seconds
before pressing the reset switch the first time. You will see the Alarm
LED flash once in about 5 seconds.
3. When you see the Alarm LED flash once, press the reset switch again.
You will then see the Alarm LED flash twice in about five seconds.
This indicates that the Internet Security Router is about to revert to the
factory default settings. If you change your mind, you may press the
reset switch again or turn the power off to cancel this action.
11.6.2 Backup System Configuration
To backup system configuration
1. Log into Configuration Manager as administrator. Click System
Management -> Configuration -> Backup. The Backup Configuration
page displays, as shown in Figure 11.8.
2. Click < Apply> to backup the system configuration.