Armasight TAT163WN7ZEUS31 Zeus 640 3-24x75 (30Hz) Thermal Imaging Rifle Scope - Manual (Page 16)

16
TABLE 2-7. ZEUS STANDARD COMPONENTS
ITEM NO. DESCRIPTION qUANTITY
1 Armasight Zeus Thermal Imaging Riflescope
A thermal imaging aiming device. Comes fully assembled with a quick-release Picat-
inny/Weaver mount. 1
2 Objective Lens Cap
Securely protects the objective lens from dirt and mechanical damage and provides
thermal protection of the Zeus. Comes attached to the objective lens. 1
3 Eyecup
A specially designed latex eyecup that reduces the amount of light that escapes
from the eyepiece and prevents illumination of the user’s face, minimizing the risk of
detection. Prevents ambient light from entering the equipment. Allows for correct and
comfortable positioning. Comes attached to the eyepiece. 1
4 Mount
A quick-release mount used to install the Zeus on a Picatinny/Weaver rail. Comes at-
tached to the Zeus. 1
5 CR123A Lithium Battery
Batteries are used to power the Zeus. 2
6 Advanced Wireless Remote Control (AWREC)
Allows the user to operate the Zeus in short-time activation mode. Ensures quick and
silent activation/deactivation of the equipment. Comes with two CR2016 (3V) batteries
installed. 1
7 Picatinny Adapter for Advanced Wireless Remote Control
Allows the advanced wireless remote control to be installed on a weapon’s Picatinny/
Weaver rail. 1
8 Operation and Maintenance Manual
Provides safety information, equipment description, mounting procedures, operating
instructions, and preventive maintenance checks and services (including a List of Spare
Parts). 1
9 Soft Carrying Case
A textile bag with a shoulder strap used for the transportation and storage of the Zeus
and its accessories. 1
10 Hard Shipping/Storage Case
A protective case used for the shipping/storage of the Zeus and its accessories.
1
2.4 OPTIONAL EqUIPMENT
Optional items are shown in Figure 2-4 and listed in Table 2-8.
1 2 3
FIGURE 2-4. OPTIONAL EqUIPMENT