Armasight TAT163WN7ZEUS31 Zeus 640 3-24x75 (30Hz) Thermal Imaging Rifle Scope - Manual (Page 30)

30
If necessary, interrupt the automatic process by pushing the central button on the control panel
during the 5 second countdown which appears at the bottom of the display.
bRIgHTNESS “+”
ZOOM
bRIgHTNESS “–”
IMAgE PALETTE
RETICLE PATTERN
RETICLE COLOR
FIGURE 3-21. SETTING BUTTONS
C. Adjust the necessary adgustment using the MAIN MENU. See Part 3.2.2 (Using the MAIN
MENU).
NOTE:
After configuration is complete, select EXIT on the MAIN MENU and push the SELECTION button
to leave the MAIN MENU. All settings will be saved.
D. Select the color of the reticle.
Momentarily push the reticle color control button to select among black, white, red, and cyan.
E. Select a reticle pattern.
Push and hold button (2) or button (4) to select from a choice of reticle patterns: “Dot 4 MOA,” “Line
Dot,” “Cross Center Dot,” “Cross,” “Crosshair”, or “No Reticle” (Figure 3-22).
FIGURE 3-22. RETICLE PATTERNS
DOT 4 MOA LINE DOT CROSS CENTER DOT
CROSS CROSSHAIR NO RETICLE
NOTE:
The reticles appear in the most recently saved position on the display.
9. Use digital zoom to magnify the central area of the displayed scene.