2 controls and display indications, 1 zeus controls – Armasight TAT163WN7ZEUS31 Zeus 640 3-24x75 (30Hz) Thermal Imaging Rifle Scope User Manual
Page 22
22
3.2 CONTROLS AND DISPLAY INDICATIONS
3.2.1 ZEUS CONTROLS
CAUTION:
DO NOT force the equipment controls past their stopping points.
The Zeus controls are shown in Figures 3-8 and 3-9, and are defined in Tables 3-1 and 3-2. The ITEM NO.
columns of the tables indicate the number used to identify items in the figures.
NOTE:
Various display symbols indicating the current operating state of the Zeus can be displayed
permanently, may appear momentarily, or can be set to appear only when a certain function
is activated.
TABLE 3-1. CONTROLS AND INDICATORS
ITEM NO.
CONTROL/INDICATOR
FUNCTION
1
Eyepiece Focus Ring
Adjusts the eyepiece diopter. The total diopter adjustment range is
covered with 2 turns of the ring.
2
Turn-pull Switch
Activates the Zeus when turned to ON.
NOTE:
You must pull the knob before turning in order to use either the
ON or STB.
Activates standby mode when turned to STB (see note above).
Deactivates the Zeus when turned to OFF.
3
Control Panel Buttons Configures operational settings. See Table 3-2 for button functions.
4
Objective Focus Ring
Focuses the objective lens. Adjusts for sharpest view of the scene.
The total focus range is covered with three quarter turns of the lens.
—
Remote Control Button Activates/deactivates the Zeus in standby when held down/released.
1
2
3
4
FIGURE 3-8. ZEUS CONTROLS