Armasight TAT163WN7ZEUS31 Zeus 640 3-24x75 (30Hz) Thermal Imaging Rifle Scope - Manual (Page 26)

26
NOTE:
Training and experience are required to quickly and properly interpret the thermal image being
displayed.
Temperature Menu
The TEMPERATURE menu (Figure 3-14) allows the user to select varying temperature detection graph-
ics in the display field of view.
Select Display Off to remove all temperature data from the display.
Select Numeric Only for a numerical representation of the temperature data on the display. The current
temperature of the object or scene in the center of the field of view will be printed on the display.
Select Thermometer Only for a graphical representation of the temperature data on the display. The
current temperature of the object or scene in the center of the FOV will be indicated by a graphical
thermometer.
Select Numeric-Thermometer item for both numerical and graphical representation of the tempera-
ture data on the display.
> EXIT
DISPLAY OFF
NUMERIC ONLY
THERMOMETER ONLY
NUMERIC-THERMOMETER
TEMPERATURE
FIGURE 3-14. TEMPERATURE MENU
Reticle Menu
The RETICLE menu (Figure 3-15) allows the user to select from a choice of reticle patterns: Dot type, Line
Dot, Crosshair Center Dot, Crosshair, and position with no aiming mark.
> EXIT
<> CROSS
RETICLE
FIGURE 3-15. RETICLE MENU
NOTE:
To navigate through the items on the RETICLE menu, push and hold down the LEFT/RIGHT but-
ton.
Boresight Menu
The BORESIGHT function allows the user to change the reticle position in the display.
Figure 3-16 shows the boresight screen.