Armasight TAT163WN7ZEUS31 Zeus 640 3-24x75 (30Hz) Thermal Imaging Rifle Scope - Manual (Page 24)

24
ITEM NO. FUNCTION DESCRIPTION
2, 4
RETICLE PATTERNS
CONTROL
To scroll through the reticle types, push and hold button (4) or push
and hold button (2) to scroll down. There are five types of reticles
available: “Dot 4 MOA”, “Line Dot”, “Cross Center Dot”, “Cross”,
“Crosshair”, and position with no aiming mark.
RETICLE POSITION
ZEROING
Simultaneously pushing buttons (2) and (4) zeroes the reticle posi-
tion to the center of the screen.
LEFT, RIGHT
Use the LEFT (2) and RIGHT (4) buttons to navigate through the items
on the menu.
5
FFC PROCESS
INTERRUPTION
Pushing button (5) when the countdown is on the screen will cancel
the FFC and the shutter will not interrupt viewing.
MENU
Pushing and holding button (5) will bring up the Main Menu selection.
The menu includes the following functions: Palette, Temperature,
Reticule, Boresight, Scenarios, Settings, Corrections and Store Image.
SELECTION
Push the SELECTION button (5) to view the settings available for the
item selected.
3.2.2 MAIN MENU
Most setup options can be accessed from the MAIN MENU.
To display the MAIN MENU, push and hold down the MENU button (5) on the control panel (Figure
3-9).
UP
DOWN
LEFT
SELECTION
RIgHT
FIGURE 3-10. MAIN MENU NAVIGATION BUTTONS
Once the MAIN MENU is displayed (Figure 3-11), use the UP and DOWN buttons (Figure 3-10) to navigate
through the items on the menu.
Push the SELECTION button to view the settings available for the item selected.
NOTES:
Navigate through submenu items by pushing the UP and DOWN button, except where other-
wise expressly indicated. The LEFT and RIGHT buttons are available only when specified on the
menu screen with < > symbols.
After a menu item is selected, push the SELECTION button to make the selected setting/ acti-
vate the selected function.
Select the EXIT item and then push the SELECTION button to return to the MAIN MENU.
TABLE 3-2. CONTINUED