Xylem IM250R03 Aquavar CPC-FD - Manual (Page 17)

17
2. Lay the filter frame on a flat work surface. Remove
the 3 retaining brackets by squeezing the tabbed
corners in towards the middle of each bracket
until the bracket clears the filter frame. Save these
brackets for replacement. Remove and inspect the
filter.
3. Install the replacement filter. Be sure to tuck the filter
into the grove around the entire filter frame. This is very
important for proper installation.
4. Reinstall the 3 filter restraining brackets. These will
prevent the filter from being pulled out of the filter
frame.
• Install the center bracket first.
• Install the 2nd bracket overlapping the center
bracket by ½ to the left.
• Install the 3rd bracket overlapping the center bracket by ½ to the right.
1st filter retaining bracket
1st and 2nd filter retaining brackets
All 3 filter retaining brackets
5. Install the filter frame back to the cabinet door. Carefully
align the mounting hooks to the slots in the cabinet
door. The hooks should be pointing down. Press in at the
center of the filter frame with your knee and gently press
down with your hands at the top of the frame. The filter
frame will slide down approximately ¾ inch and should
be sealed securely to the door around the entire filter
frame.
PC00009 PC00007
PC00007 PC00009
PC00013
MAINTENANCE
PC00008 PC00006