Xylem Lab 960 - Manual (Page 37)

Lab 960 Operation
37 ba75557e05 11/2009
Switching off the
temperature
compensation
5 Confirm the selection with <OK> .
The linear temperature compensation is switched on.
The meter switches to the measured value display.
The selected temperature compensation appears as the status
display.
1 Press <CAL> repeatedly until tc is displayed.
2 Confirm the selection with <OK> or <CAL
_
> .
3 Press <CAL> repeatedly until the following display appears.
4 Confirm the selection with <OK> .
The temperature compensation is switched off.
The meter switches to the measured value display.
c T