Xylem Lab 960 - Manual (Page 42)

Operation Lab 960
42 ba75557e05 11/2009
4.6.3 Downloading the data storage
You can download stored measurement datasets:
z to the display
z to the interface (see page 45)
Download to the display
While the memory is displayed you can:
Note
In order to search for certain data of the dataset, e.g. for the date,
proceed as follows:
1 Open the storage menu with <RCL>.
2 If necessary, scroll with <RCL> until Sto disp (measurement
datasets) is displayed.
3 Press <OK> to display the dataset that was last stored.
The memory location of the dataset is displayed for approx. 2
s, then the respective temperature appears.
z
press
<OK> to display further data of the dataset (ID number,
date, time, memory location, temperature)
z use <
▲>
to display the next dataset
z use <
▼>
to display the previous dataset
1 Use <OK> to scroll on until the required data of the dataset, e.
g. the date, is displayed.
2 Use <
▲> or <▼> to scroll until the required date is displayed.
After approx. 2 s the display shows the respective temperature
value.