Xylem Lab 960 - Manual (Page 48)

Operation Lab 960
48 ba75557e05 11/2009
4.8 Settings
You can adapt the meter to your individual requirements. The settings
are done in the following menus:
z System settings (<OK
_
>)
– Baud rate (Baud)
– Switch-off interval (tOff)
– Date (Day.Month)
– Date (Year)
– Time (Time)
z Calibration and measurement settings (<MODE
_
>)
– Reference temperature (Tref25 or Tref20)
– Temperature unit (°C / °F)
– Cleaning interval (Int.C [0 ... 999])
z Setting and starting automatic storing processes
(<STO
_
>, see page 40)
– AutoStore interval (Int.1)
z Setting and starting the data download to the interface
(<SC
_
>, see page 45)
– Data download interval (Int.2)
Note
You can exit the setting menu at any time by pressing <MODE>.
Settings already modified and confirmed with <OK> are stored.