Alpha Technologies INEX Inverter System - Manual (Page 31)

Argus Technologies Ltd. 014-114-C0 Rev D WC
Printed in Canada. © 2008 Argus Technologies Ltd. ARGUS and INEX are registered trademarks of Argus Technologies Ltd. All Rights Reserved. Page 21 of 43
7. If controller module and/or interface module is not required, you can cover the excess cavity of
controller/interface/STS shelf with optional blank plates. The optional blank plate comes into two pieces.
8. After screwing the inner silver metal piece to the shelf bottom plate, use bolts on both sides to attach the
black metal blank plate to the inner silver piece.
5.2 Controller Module Implementation
1. To install the controller module, slide it into the 2U-wide controller slot of the pre-wired
controller/interface/STS shelf until the faceplate is flush with the mounting ears. With the power on, the green
LED of the controller unit will light if everything functions correctly.
2. If an interface module is available, simply insert the interface module into the 3U-wide interface slot of the pre-
wired controller/interface/STS shelf until the faceplate is flush with the mounting ears.