Alpha Technologies INEX Inverter System - Manual (Page 7)

Specifications for INEX Inverter System Continued
Argus Technologies Ltd. 014-114-B1 Rev D WC
Printed in Canada. © 2008 Argus Technologies Ltd. ARGUS and INEX are registered trademarks of Argus Technologies Ltd. All Rights Reserved. Page 4 of 4
Mechanical
Inverter Module: Dimensions: 43.8mm H x 215mm W x 270mm D
[1.7" H x 8.5" W x 10.6" D]
Weight: 2.5 kg (5.5 lb.)
STS Module:
Dimensions: 43.8mm H x 215mm W x 270mm D
[1.7" H x 8.5" W x 10.6" D]
Weight: 2.1 kg (4.6 lb.)
Controller Module:
Dimensions: 43.8mm H x 87.9mm W x 277mm D
[1.7" H x 3.4" W x 10.8" D]
Weight: 0.5 kg (1.1 lb.)
Interface Module:
Dimensions: 43.8mm H x 129.5mm W x 79.7mm D
[1.7" H x 5.1" W x 3.1" D]
Weight: 0.25 kg (0.55 lb.)
Inverter Shelf:
Dimensions: 43.8mm H x 440mm W x 329.5mm D
[1.7" H x 17.3" W x 13" D]
Weight: 2.7 kg (6 lb.)
Controller/Interface/STS Shelf:
Dimensions: 43.8mm H x 440mm W x 329.5mm D
[1.7" H x 17.3" W x 13" D]
Weight: 2.7 kg (6 lb.)
MBSDU Panel:
Dimensions: 88mm H x 483mm W x 329.5mm D
[3.5" H x 19" W x 13" D]
Weight: 7.0 kg (15.4 lb.)
Environmental
Operating Temperature: -20 to +70°C (-4 to +158°F)
-5 to +50°C (23 to +122°F) with full performance
Storage Temperature:
-40 to +85°C (-40 to +185°F)
Humidity:
0 to 90% non-condensing
Heat Dissipation:
Forced air cooling for inverter and STS modules
Operating Altitude:
1500m (4922 feet)
Audible Noise:
55dB ETS 300 753 Class 3.1
Standards
Inverter Module: EN 60950-1, UL-60950-1, IEC 60950-1, CSA C22.2 No. 60950-1
STS Module:
EN62040-1-1, IEC 62310-1, CSA C22.2 No. 107.3, ANSI/UL 1778
Controller Module:
EN 60950-1
Marking:
cULus, CE, RoHS, C-Tick
The above information is valid at the time of publication. Consult factory for up-to-date ordering information. Specifications are subject to change without notice.