B&K Precision 4045B - Manual - Manual (Page 103)

103
Considerations:
1) The value of the data at the start and end points
must first be set by the user, using the
:ARB:DATA command.
2) The range of the straight line cannot overlap with
protected memory.
3) The end address must be greater than the start
address.
Predefined waveforms
:ARB:PRED <shape>,<start address>,<length>,<scale>
This command is used to load the waveform memory
with a specific type of waveform.
Arguments
Shape
Type: Character
Options: SINusoid
SQUare
TRIangle
NOISe (Pseudo-Random Noise)
ANOise (Noise added to the current
waveform)
Start Address
Type: Numeric. The MIN and MAX forms both
set the address to 1
Range: 1 to 1000
Rounding: to integer value
Length
Type: Numeric.