B&K Precision 4045B - Manual - Manual (Page 83)

83
specifications. The '<ws>' is used to denote a white space
character.
Note: When controlling the instrument remotely, do
not interrupt the instrument with front panel
interactions. Although the instrument will be
automatically changed back to LOCS (local) mode,
subsequent remote commands may cause errors
during communication, in which will require a need of
restarting the instrument before continuing again with
remote operations.
4.9.1 Default Subsystem
The Source Subsystem controls the frequency, voltage,
amplitude modulation and clock source. The command
structure is as follows:
FUNCtion SINusoid|SQUare|TRIangle|
FREQuency <numeric value>
AMPLitude <numeric value>
OFFSet <numeric value>
DCYCle <numeric value>
OUTPUT ON/OFF
MODULation OFF/AM/FM/INT/EXT
DEPTh <numeric value>
MODFRequency <numeric value>
MODSHape SIN/TRI/ SQU
DEViation <numeric value>
SWEep ON/OFF/LIN/LOG