B&K Precision 4045B - Manual - Manual (Page 67)

67
BAUDRATE: 115200
PARITY: NONE
DATA BITS: 8
STOP BIT: 1
FLOW CONTROL: NONE
4.2 Device States
The device may be in one of the two possible states
described below.
4.2.1 Local State (LOCS)
In the LOCS state, the device may be operated from the
front panel.
4.2.2 Remote State (REMS)
In the REMS state, the device may be operated from the
USB interface. Actuating any front panel key will cause the
device state to revert to the LOCS.
4.3 Message Exchange Protocol
The device decodes messages using the Message
Exchange Protocol similar to the one defined in IEEE
488.2. The following functions implemented in the MEP
must be considered: