B&K Precision 4045B - Manual - Manual (Page 84)

84
SWRAte <numeric value>
SWSTArt <numeric value>
SWSTOp <numeric value>
MODE CONT/ TRIG / GATE / BRST
TRIG INT / EXT
TRAte <numeric value>
BURSt <numeric value>
FREQuency <frequency>
The frequency command controls the frequency of
the output waveform.
Arguments
Type: Numeric.
Units: MHz, KHz, Hz (default)
Range: For SIN and SQU – 0.1 Hz to Max.
frequency (see specifications),
For TRI – 0.1 Hz to 1 MHz,
For ARB - Dependent on the Point Rate and
Wavelength.
Fmax = 1/(20nS * Wavelength)
Fmin = 1/(50S * Wavelength)
Rounding: The value is rounded to 5 digits or 100 mHz.
(DDS) or 4 digits (ARB)
Command Type: Setting or Query
Setting
Syntax: FREQuency<ws><frequency>[units]
FREQuency<ws>MINimum|MAXimum
Examples: FREQ 5KHZ