B&K Precision 4045B - Manual - Manual (Page 96)

96
MODE <trigger mode>
This command is used to set the trigger mode.
Arguments
Type: Character
Options: CONTinuous
TRIGger
GATE
BURSt
Command Type: Setting or Query
Setting
Syntax: MODE<ws><CONT|TRIG|GATE|BURS>
Examples: MODE CONT
MODE BURS
Query
Syntax: MODE?
Response: CONT|TRIG|GATE|BURS
TRIGger <trigger source>
This command is used to select the trigger source, for use
in the Trigger, Gate and Burst trigger modes.
Arguments
Type: Character
Command Type: Setting or Query