B&K Precision 4045B - Manual - Manual (Page 82)

82
*SAV - Save instrument state
This command is used to store the current instrument
state in the specified memory location.
Arguments
Type: <NRf>
Range: 0 to 9. Non integer values are rounded
before execution
Type: Common Command
Syntax: *SAV<ws><NRf>
Example: *SAV 2
Stored setting location 0 stores the factory defaults, and is
a read-only location.
4.9 INSTRUMENT CONTROL
COMMANDS
Instrument control commands are grouped into logical
subsystems according to the SCPI instrument model. The
commands are comprised of mnemonics indicating the
subsystem to which the command belongs, and the
hierarchy within that subsystem. When the command is to
be referred to the Root node, it should be prefixed with a
colon (:). Mnemonics appearing in square brackets [...] are
optional. The '|' character is used to denote a choice of