B&K Precision 4045B - Manual - Manual (Page 47)

47
waveform (number of points
for a full wave). Different
waveforms have different
limitations on the length, as
shown in Table 3-1.
Table 3-1: Waveform Length Limits for Predefined
Waveforms
Wave Minimum
Length
Divisible by
Sine 16 4
Triangle 16 4
Square 2 2
Noise 16 1
F3: Scale - Selects the scale factor
of the waveform. 100% means that the
waveform spans the full scale of -2047
to 2047. Scale factors are limited by
the point data value of the starting
point and automatically calculated by
the unit.
F4: Exec - Prompts you to confirm
whether to execute the selected
predefined waveform. Press NO to
abort executing the predefined
waveform; press YES to execute the
predefined waveform. On the NOISE