B&K Precision 4045B - Manual - Manual (Page 95)

95
SWSTArt 5E3
SWSTArt MAXIMUM
SWSTArt MIN
Query
Syntax: SWSTArt?[<ws>MAXimum|MINimum]
Examples: SWSTArt ?
SWSTArt ? MAX
Response: NR3
SWSTOp
This command sets the stop frequency of the sweep:
Arguments
Type: Numeric.
Units: MHz, KHz, Hz (default)
Range: Dependent on the frequency range of the
current function.
Command Type: Setting or Query
Setting
Syntax: SWSTOp<ws><frequency>[units]
SWSTOp<ws>MINimum|MAXimum
Examples: SWSTOp 5KHZ
SWSTOp 5E3
SWSTOp MAXIMUM
SWSTOp MIN
Query
Syntax: SWSTOp?[<ws>MAXimum|MINimum]
Examples: SWSTOp ?
SWSTOp ? MAX
Response: NR3