B&K Precision 4045B - Manual - Manual (Page 60)

4
Programming
4.1 Overview
This section provides detailed information on programming
the generator via the USB (virtual COM) interface.
4.1.1 Connecting to USB (Virtual COM)
Interface
Currently, the USB (virtual COM) interface supports
Windows® XP/7 operating systems.
To connect to a PC for remote communication, please
follow the steps below:
For Windows 7:
1. The USB driver is included in the CD that comes with
the instrument. You can also go to
www.bkprecision.com and browse this product’s page to
find and download the USB driver.
2. Connect the included USB Type A to Type B cable to
the generator and the computer, then power on the
instrument.
3. On most operating systems, it will attempt to
automatically install, showing the following screen: