2 arbitrary subsystem – B&K Precision 4045B - Manual User Manual
Page 99
99
Query
Syntax: ERRor?
Response: <Error number>, "<error description>"
4.9.2 Arbitrary Subsystem
The Arbitrary subsystem is not part of the SCPI
standard. It was developed to suit the needs of the
instrument. Within this subsystem are found
commands to:
1) control the point rate, start address, wavelength,
and synchronization pulse address;
2) set values of the arbitrary waveform, either
discretely or using predefined, copy or draw
functions;
3) protect an area of waveform memory;
4) set the state of the automatic update and
increment features;
5) update the waveform.
The following shows the structure of the ARBitrary
subsystem:
:ARBitrary
:PRATe <numeric value>
:ADDRess <numeric value>
:DATA <numeric value>|<arbitrary block>
:DRAW <numeric value>,<numeric value>
:PREDefined
<shape>,<start>,<address>,<length>,<scale>