Q.V.P. VAKUUM KLAMPING QUICK DISCONNECTS User Manual

Quick disconnects, Quality vakuum products, inc, For vakuum klamping

Advertising
background image

Quality VAKuum Products, Inc.

Or visit our site at

www.qualityvak.com

CALL 1-800-547-5484 TODAY!

QUICK DISCONNECTS

4/30/98 - Quick Disconnects.cdr

FOR VAKUUM KLAMPING

To correctly install your Quick
Disconnects (QD), drill a
13/32“ hole into your
template. Apply glue or
silicone around the hole and
tap the barbed end of the

male QD into the template.

The female QD is placed on the end of your vacuum line. By pressing on
the plastic lever, you can quickly connect and disconnect your vacuum line
from your templates.

STANDARD & PRO SYSTEMS

If you own a Standard or Pro system, which both have 3/8“ I.D. tubing and
fixtures, simply follow the above instructions to correctly use your QD.

SUPER PRO, INDUSTRIAL & SUPER INDUSTRIAL

If you own a Super Pro, Industrial or Super Industrial system, you must use
a hose adapter to convert your 1/2“ I.D. vacuum line to 3/8” I.D. The
adapter is a piece of 3/8” I.D. tubing which is about 1’ long and has a black
plastic 3/8” to 1/2” adapter barb on one end. Simply connect your 1/2” I.D.
tubing to the 1/2” end of the adapter and connect the female QD to the 3/8”

3/8“ VAKuum
Tubing to Pump

Template or Jig

Female

Male

13/32“ Hole

AK

74 Apsley St. - Hudson, MA 01749
Tel: 978-562-4680 - Fax: 978-562-4681

For more information on Klamping Jigs go to
Http://www.qualityvak.com/inst-m1.html

Advertising