Q.V.P. ES5 Veneering & Clamping at the same time - Manual

ES5 SUPER PRO SET-UP DIAGRAM
SIMULTANEOUS VENEERING & KLAMPING
The Electric Pump is always running when doing
VAKuum Klamping; therefore, put the switch on the
Electric Controller to “VAK Klamp.” NEVER do VAKuum
Klamping with the switch on “VAK Bag.”
When you are not using the pump for Klamping keep the
foot pedal off or remove the Klamping set-up and attach
the hose with the check valve directly onto the filter.
Pressing on its top side creates vacuum to the
VAK Klamp(s) and the VAK Bag(s). Pressing the pedal
on its bottom side shuts off the vacuum from the pedal to
the klamp and allows air to bleed back to the klamp and
release the piece. The check valve prevents air from
bleeding back into the bag.
the pedal
Vacuum
Gauge
Tee
Tee
VAKuum
Jig
Check
Valve
(Red end
towards bag)
Tee
3/17/98 - ES5 SuperPro K&V.CDR (REV.1)
Quality VAKuum Products, Inc.
Or visit our site at
www.qualityvak.com CALL 1-800-547-5484 TODAY!
Klamping Set-Up
1/2 I.D.
3/8 I.D.
1/2 I.D.
VAKuum
Bag
Pneumatic
Pedal
Filter
Electric Pump
Electric
Controller
X
Remove orange plastic plug and screw in filter assembly.
74 Apsley St. - Hudson, MA 01749
Tel: 978-562-4680 - Fax: 978-562-4681