Q.V.P. ES5 with Pneumatic Foot Switch User Manual

Quality vakuum products, inc, Es5 super pro set-up diagram

Advertising
background image

ES5 SUPER PRO SET-UP DIAGRAM

For VAKuum KLAMPING

The Electric Pump is always running when doing
VAKuum Klamping; therefore, put the switch on the
Electric Controller to “VAK Klamp.” NEVER do VAKuum
Klamping
with the switch on “VAK Bag.”

When you are not using the pump for Klamping keep the
foot pedal off or remove the Klamping set-up.

Pressing

on its top side creates vacuum to the

VAK Klamp(s) and the VAK Bag(s). Pressing the pedal
on its bottom side shuts off the vacuum from the pedal to
the klamp and allows air to bleed back to the klamp and
release the piece.

the pedal

VAKuum

Jig

10/06/03 -

.CDR (REV.2)

ES5 SuperPro Klamping

3/8 I.D.

Filter

Electric Pump

Electric

Controller

½ Tubing

Pneumatic

Pedal

3/8 I.D.

Hose Adapter

Check Valve

V

Quality VAKuum Products, Inc.

Remove orange plastic plug and screw in filter assembly.

74 Apsley St. - Hudson, MA 01749
Tel: 978-562-4680 - Fax: 978-562-4681

Advertising