Castle TSM-21 Diagnostic Manual - Manual (Page 25)

Castle Inc TSM-21 Diagnostic Manual v2 Page 25 of 63
Router T-Knob
Router U-Bolt
Router Motor
Fig 8
3. Unplug the Router motor.
4.
With your right hand loosen the Router T-Knob a few turns to provide enough slack to
drop the Router Motor down into your left hand and then out the rear door.
5.
When re-installing, make sure the motor face is pushed up to seat flush with the tabs on
the yellow carriage (if unsure, remove table top to confirm location).
6. Tighten the black T-Knob onto the U-Bolt. Hold the motor face flush with the yellow car-
riage tabs until the motor has been fully secured by the U-Bolt.
7.
Manually rock the Motor Carriage toward the rear of the machine and make sure that the
router bit cleanly fits in the slot on the table top.
5.7.2 SERVICING THE ROUTER MOTOR:
1. Follow the instructions found in your Porter Cable manual on maintaining the motor.
This includes information on keeping the motor clean and free of dust, maintaining the
brushes and replacing the tooling.
2. The Router motor is warranted for one year from the purchase of the machine.
3.
Warranty replacement and parts purchases can be handled by your nearest Porter Cable
dealer/service center, or Castle.