Castle TSM-21 Diagnostic Manual - Manual (Page 5)

Castle Inc TSM-21 Diagnostic Manual v2 Page 5 of 63
1.1 How to Use This Manual
1.
Closely observe the behavior of the machine noting which component is involved and
when in the operational sequence the problem is occurring.
2. Go to Section IV-Diagnostic Descriptions, which is organized by the operational
sequence of the machine.
3.
Find the description which most closely matches the problem and systematically perform
the Diagnostic Procedures listed, checking them off as you go.
Example:
Page Procedure
Clamp comes down as soon as air is attached…with Machine power OFF:
□ Check clamp Solenoid for function or blockage 12-13 21.11
Note: If you are unsure of your observations or if the fault behaviour seems irregular you
should “Dry Cycle” test the machine. See Procedure 21.95, page 4.