Hach-Lange ORBISPHERE Model 51x User Manual - Manual (Page 16)

14
Specifications
DIGITAL OUTPUTS
Measurement alarm relays on the
measurement board(s)
Three alarm relays per measurement board
1A-30 VAC or 0.5A-50 VDC on a resistance load
Configurable to Normally Open [NO] or Normally Closed [NC] contacts by changing the
jumper positions.
WARNING
Potential Electrocution Hazard. Connect only safety low voltage < 33 VAC RMS.
System alarm relay on the main
board. One system board with
one system relay per instrument
One "instrument system alarm" relay per instrument
1A-30 VAC or 0.5A-50 VDC on a resistance load
Normally closed [NC] (NO relay also available) when instrument is turned on. Opens when
a system alarm is detected, and when it does not receive any signal.
WARNING
Potential Electrocution Hazard. Connect only safety low voltage < 33 VAC RMS.
GENERAL
Thermal cut off Prevents ageing of sensors when exposed to high temperatures
COMMUNICATION
Options
RS-485 or PROFIBUS-DP (optional)
USB client
USB host
Ethernet 10/100 Base-T
SIZE AND WEIGHT
Wall and pipe mount
(H x D x W) 236.5 x 160 x 250 mm - weight 3.8 kg
9.31 x 6.30 x 9.84 ins. - weight 8.38 lbs
Panel mount: Face (housing)
(H x D x W) 156 (123) x 250 x 220 (214) mm - weight 2.9 kg
6.14 (4.84) x 9.84 x 8.86 (8.43) ins. - weight 6.39 lbs
Portable
(H x D x W) 225 x 250 x 219 mm - weight 3.8 kg
8.86 x 9.84 x 8.62 ins. - weight 8.38 lbs