Figure 6, Installation – Hach-Lange ORBISPHERE Model 51x User Manual User Manual
Page 28
Advertising
26
Installation
Figure 6 Wall and pipe mount connection panel
1.
Power cable. The type of connection will
vary depending on the instrument
specification (see
)
2.
USB-B client 4 pin connector. Use the
adapter cable (see
3.
Ethernet cable gland
4.
Sensor channel 3 cable gland (option)
5.
Sensor channel 2 cable gland (option)
6.
Sensor channel 1 cable gland
7.
USB-A host connector for mass storage
device
8.
External pressure sensor cable gland
(option)
9.
Input/Output 3 cable gland (option)
10.
Input/Output 2 cable gland (option)
11.
Input/Output 1 cable gland
12.
Keylock (bottom panel)
Advertising