Hach-Lange ORBISPHERE Model 51x User Manual - Manual (Page 45)

43
User Interface
4.2.2 Special function keys on portable instruments
For the portable instruments, the state of the battery is indicated at the bottom of the
measurement view. Pressing the battery icon calls the “Batteries” state window.
4.2.3 Menu navigation
4.2.4 Rolling list
The green sample mode start/stop button starts the measurement process when
in sample mode. Pressing the button again manually interrupts the process and
an “aborted” message is displayed in the numeric view.
See Sample mode measurements (portable instrument) on page 52 .
For the portable instruments, the state of the battery is indicated at the bottom of the
measurement view. Pressing the battery icon calls the “Batteries” state window.
100% 75% 50% 25% empty
Figure 23 Main menu window
Pressing the “menu” button in the header bar calls the main
menu. The display is made of three columns:
• The left column is the menus, or submenus (greyed out
options are not available)
• The center column shows a tree view of actual position
inside the menu structure
• The right column has the generic controls detailed below.
Return to previous menu (one step back)
Jump directly to main menu
Close the menu and go back to measurement view display. If the
menu button is pressed again, the menu returns to its previous state
(tree structure is saved)
Help topics concerning current menu
Figure 24 Rolling list
example
For convenience, selection through a possible large list of
items has been designed with a rolling list, like in this
example. Use the up and down arrow to navigate, or select
directly one item and press OK.