4 setting the serial interface (v24) – Hach-Lange LUMISTOX 300 LPV321 User Manual User Manual
Page 30
LUMIStox 300 Operating Manual
Dr. Bruno Lange GmbH
______________________________________________________________________________
______________________________________________________________________________
Page: 30
3.4 Setting the serial interface (V24)
The serial interface is used to transfer data to a computer or a Dr. Lange printer (e.g.
LD500). The necessary interface parameters are already specified for the Dr. Lange
products and can be selected. This option allows other interface parameters to be set in
accordance with the specifications for the connected peripheral device (PC or printer).
Sequence:
Select option <V24>;
scroll with + or - and confirm
required protocol with <ok>:
Protokol =free:
Select settings (bit/s,
databits, stopbits, parity,
handshake) in accordance with
the documentation of the
peripheral device, e.g. PC.
Protokol = LD2W:
for Dr. Lange printer, e.g. LD500,
too
Protokol = Lsoft
for Dr. Lange LUMISsoft
evaluation software
Protokol = no
Interface off
options
V24 PRN time
bit/s =
9600
+
-
ok
databits =
8
7
8
ok
stopbits =
1
1 1.5
2
ok
handshake = no
+
-
ok
parity = none
even odd no ok
protocol = free
+
-
ok
protocol =LD2W
+
-
ok
protocol = LSoft
+
-
ok
protocol =
no
+
-
ok