Hach-Lange BUEHLER 3010 4010 4210 4410 Manual - Manual (Page 36)

Operation
Page 36 Manual BÜHLER BU4010ff
Troubleshooting – distributor Bühler 4410
If a fault develops in your sampler, we can only provide prompt assistance if you give us the type and
serial number of the apparatus concerned. You will find these data on the type plate.
The more precise your description of the fault is, the better our fault diagnosis will be.
Symptom Possible cause Action Chapter
No function
Connections
Check connections
Distributor
Program cannot be
started
Wrong distributor has been
entered
Correct entry
Programming
Wrong positioning of
distributor
Interfering pulses.
Pulse generator does not
function correctly
Contact service
department
Distributor