Hach-Lange BUEHLER 3010 4010 4210 4410 Manual User Manual
Page 48
Advertising
Operation
Page 48
Manual BÜHLER BU4010ff
Program end
After having defined the start conditions, the program
end can be set as follows:
- AFTER 1 RUN
Program is terminated after 1 run
- AFTER X RUNS
Program is terminated after X runs
- CONTINUOUS OPERATION
Program is continued indefinitely
Display of PROGRAM STATUS/STOP
Shows Status of programs. Programs can be paused or
stopped.
The status of all programs can be checked by pressing
the arrow keys (right/left).
When pressing the Enter key, the following is displayed:
ACTIVE = Program is started
or
INACTIVE = Program is not started
Advertising