Hach-Lange BUEHLER 3010 4010 4210 4410 Manual - Manual (Page 4)

General Information
Page 4 Manual BÜHLER BU4010ff
General information
We are glad that you have chosen this product.
When developing this device, we combined approved technique with innovative detail solutions.
Greatest importance has also been attached to the design of an apparatus which provides easy
access for connection and maintenance works.
Safety remarks
Disconnect the mains power connections before carrying out any connection, maintenance or
repair works.
Before putting into service
-
Please read these operating instructions and special remarks thoroughly before putting the
device into service.
- Familiarize yourself with the safety and operating requirements in order to safeguard
personnel and equipment.
- The apparatus has been subjected to exhaustive quality inspections before dispatch.
- Any service and maintenance works required may only be carried out by trained service
personnel.
- Observe the local safety regulations and the rules for prevention of accidents.
- Observe the rules concerning the handling of hazardous substances.
- Do only use original spare parts or spare parts authorised by the manufacturer.
- No liability or claims under guarantee will be accepted in respect of any modifications or
conversions of the apparatus, other than those carried out by us or by persons authorised by
us or for which we have given express permission (in a written form)! This also refers to any
damage due to incorrect operation and/or improper use of the equipment.
Permissible application
The permissible application of the water sampler consists in the extraction of liquid, aqueous
substances, temperature range 0°C to 40°C. The device must only be installed in areas free from
explosion hazard and must only be used for sampling of non-explosive substances. Please refer to
the technical specifications in chapter “Specifications”. Other applications are not allowed!
Permissible operating and ambient conditions
-
Sample extraction of liquid aqueous substances, temperature range: 0°C to 40°C.
- The sampler is designed for operation in non-hazardous areas (no explosion risk).
- The sampler can be operated at ambient temperatures from -20°C to +43°C.
- Sampling from pressurised lines is not possible without optional accessories.
- The device is weather-proof and suitable for outside operation.