Hach-Lange BUEHLER 3010 4010 4210 4410 Manual - Manual (Page 46)

Operation
Page 46 Manual BÜHLER BU4010ff
Set the BOTTLE FILL TIME
(here: each bottle is filled for 1 hour).
Terminate programming.
Now, the program can be started directly.
If selected "MORE SETTINGS ", the additional settings
are available:
- PROGRAMMING OK
(Set of selection and back to the START-
Menue)
- SERIAL SAMPLES
(samples/extraction)
means that each requested extraction consists of x-samples. This is useful
for a larger sample volume.
- BOTTLE SELECTION
(first Bottle / last Bottle)
The first and the last bottle can be defined for a cycle.
- PROGRAM PAUSE
(Prg.Pause=Timeshift of program start. Timeshift between end of program
x and start of next program. Moves the program cycle for continuous
operation with that time.