Ransburg Vector R Series Cascade 79523 R90 Waterborne - Manual (Page 24)

Vector R Series Cascade Applicators - Installation
Ransburg
20
The 9060 Control
Unit must be located a minimum of 5’ (1.5 m)
outside of what is considered to be the hazardous
area. Any mounting method used must properly
support the unit to a minimum of 4X the unit weight.
† See manual CP-13-07 for the installa-
tion instructions for the 9060 control unit.
NOTE
† For safe use these applicators 79500,
79501 and 79523 must be used with the
appropriate 9060 Control Unit part number
80131-XXX. For exact configurations see
the approved configuration drawings in the
front of this manual.
W A R N I N G !
AH-06-01.13