IAI America ERC - Manual (Page 23)

3
1.3 Specifications
(Note 1) The figures in blank bands indicate the maximum speeds for respective strokes. The maximum speeds during
vertical operation are shown in parentheses.
(Note 2) The load capacity is based on operation at the rated acceleration. In the case of a guide type, find the applicable
load capacity in the above table and subtract the weight of the guide to obtain the effective load capacity.
Model
Stroke (mm) and maximum speed (mm/sec) (Note 1)
Load capacity (Note 2) Rated acceleration
Horizontal Vertical Horizontal Vertical
Slid
er type
Rod type