IAI America ERC - Manual (Page 84)

64
(7) Acceleration only MAX
(ACC MAX)
 Select the specified acceleration or maximum acceleration by entering
“0” or “1.”
The default value is “0.”
0: Specified acceleration --- The value entered in (4) becomes the
actual acceleration/deceleration.
1: Maximum acceleration --- The maximum acceleration is applied only
during acceleration.
During deceleration, the value input in (4)
is used.
Note: A rough guide for enabling the acceleration only MAX function is when the actual payload capacity
is one-third the load rating or less.
Check the payload rating by referring to 1.3, “Specifications.”
(7) Acceleration only MAX = 0 (7) Acceleration only MAX = 1
Acceleration/deceleration
set in (4)
Acceleration/deceleration
set in (4)
Maximum acceleration Speed
Speed
Moving distance Moving distance