IAI America RCA2-SA6R - Manual (Page 17)

9
7. Transportation
7.1 Handling the Unassembled Actuator
When transporting the unassembled actuator alone, pay attention to the items specified below.
7.1.1 Handling the Packed Unit
Unless otherwise specified, single-axis actuators are shipped in individual packaging.
Please handle packages carefully during transport to ensure that product is not damaged by bumping or
dropping.
Never attempt to move heavy packages by yourself.
Always set packages down on a level surface.
Never climb on top of packages.
Never place heavy objects or objects where the load is concentrated in one place on top of packages,
as this may cause deformation.
7.1.2 Handling the Actuator After Unpacking
Do not carry an actuator by a cable or attempt to move it by pulling the cable.
When transporting the unassembled actuator, pay attention to the items specified below.
When unpacking the actuator and handling it thereafter, always hold it by the base.
Never hold an actuator by the stainless sheet.
Be careful not to bump the actuator into anything when moving it, paying particular care to the side
covers.
Do not attempt to force any part of the actuator. Take particular care not to force the stainless sheet.
Warning: Never hold the actuator by the stainless sheet.
Supplement) For the names of each part of the actuator,
refer to 1, "Part Names.”